MRV Communications LX-4000 Series Informacje Techniczne Pobierz pdf (Strona 302)

100

101

11-12 Guidelines for Creating or Modifying Actions

LX Series Configuration Guide

X To configure a power port async lost contact trigger

L This command applies to all power units.

Execute the power port async <port_number> lost

contact command from the Trigger-Action Command Mode

to poll the power device with status commands (every 10

seconds). If the device does not respond within a certain time

period, the LX is considered to have "lost contact" with the

device and the action is performed. The trigger does not

perform the action again until a successful response is

received, and then followed by another timeout:

Example Trigger_TestA:0 >>power port async 2 lost contact

where the port number is the port on which you want to

detect loss of contact with the attached device.

X To monitor the power threshold based on total power

per input

L Certain 5250 Power Control models are three-phase.

5250 models supporting three phase power input can

set trigger-actions on each phase individually. Using

a 5250 three phase unit is similar to having three

power strips in one unit, the new features apply to

each phase individually. On 4800 DC models, you can

set thresholds on individual ports as well as on the

device as a whole.

Execute the power port async <port_number> load <|>

<threshold_number> input A|B|C [hysteresis

<hysteresis_number>] command to perform monitoring on

a specific input (for Power Control 4800 and 5250 series

only):

Trigger_TestA:0 >>power port async 12 load

< 8 input A hysteresis 1

If the defined threshold is exceeded, the appropriate action is

executed when the rule is enabled. Valid threshold values are

in the range from 0.0 to 65534.9. Valid hysteresis values are

in the range is 0.0 to 9.9 (note that you can use decimals).

A Power Port

Async lost

contact

Trigger is used

to detect a

timeout on a

specific port.

A Power Port

Async Load

Input Trigger

is used to

monitor the

power threshold

based on total

power per input.

1 2 ... 297 298 299 300 301 302 303 304 305 306 307 ... 691 692

Komentarze do niniejszej Instrukcji

Brak uwag

MRV Communications LX-4000 Series Informacje Techniczne Strona 302

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Serwery MRV Communications LX-4000 Series