MRV Communications LX-4000 Series Informacje Techniczne Strona 192

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
Przeglądanie stron 191
6-12 Configuring a Rotary
LX Series Configuration Guide
Figure 6.1 illustrates a rotary on an LX unit.
Figure 6.1 Rotary Connections on an IP Interface
The rotary is transparent to users. A user simply requests a
connection to an IP address, and the LX unit sets up the
connection with one of the available ports in the rotary group.
X To configure a rotary on an IP interface
1. Create a new IP interface, or access an existing one, by
executing the interface command in the Configuration
Command Mode:
Example Config:0 >>interface 1
This enters the Interface Command Mode for the specified
interface (for example, Interface 1). The Interface
Command prompt (such as
Intf 1-1:0 >>) is displayed.
2. Use the address command to configure a server IP
address for the IP interface:
Example Intf 1-1:0 >>address 10.240.10.100
3. Use the rotary port command to create a rotary, and to
assign LX asynchronous ports to the rotary:
Example Intf 1-1:0 >>rotary 1 port 1 2 3
The user initiates a Telnet
connection, or an SSH
connection, to the IP address
of an IP interface that has been
configured as a rotary. The
user is connected to an
available port in the rotary port
list.
LX Unit
Przeglądanie stron 191
1 2 ... 187 188 189 190 191 192 193 194 195 196 197 ... 691 692

Komentarze do niniejszej Instrukcji

Brak uwag