MRV Communications LX-4000 Series Informacje Techniczne Pobierz pdf (Strona 204)

100

101

7-2 Setting Up Broadcast Groups

LX Series Configuration Guide

Setting Up Broadcast Groups

X To set up a Broadcast Group

1. Access the Configuration Command Mode in the LX CLI.

2. Execute the interface command to enter the Interface

command mode for an IP interface:

Config:0 >>interface 1

3. Use the broadcast group command to create a

Broadcast Group. In the following example, the Broadcast

Group Command prompt (

BrGroups 4:0 >>) indicates that

you are in the Broadcast Group Command Mode for

Broadcast Group 4.:

Intf 1-1:0 >>broadcast group 4

This enters the Broadcast Group Command Mode.

4. Use the master port command to specify the Master

Ports for the Broadcast Group. In the following example,

asynchronous port 5, and TCP port 1500, are specified as

Master Ports for Broadcast Group 4:

BrGroups 4:0 >>master port async 5

BrGroups 4:0 >>master port tcp 1500

BrGroups 4:0 >>master port telnet 2500

BrGroups 4:0 >>master port ssh 2500

5. Use the slave port command to specify the Slave Ports

for the Broadcast Group. In the following example,

asynchronous port 4, 6, and 7, and TCP port 2500, are

specified as Slave Ports for Broadcast Group 4:

BrGroups 4:0 >>slave port async 4,6,7

BrGroups 4:0 >>>slave port tcp 2500

BrGroups 4:0 >>slave port telnet 2500

BrGroups 4:0 >>>slave port ssh 2500

6. Use the mode command to specify the Telnet mode for the

Broadcast Group. In the following example, the Telnet

mode is specified as line; the Telnet mode can also be

specified as character:

See

“Command

Mode

Descriptions”

on page 1-5

for more

information.

1 2 ... 199 200 201 202 203 204 205 206 207 208 209 ... 691 692

Komentarze do niniejszej Instrukcji

Brak uwag

MRV Communications LX-4000 Series Informacje Techniczne Strona 204

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Serwery MRV Communications LX-4000 Series