MRV Communications AE092FCAHA Instrukcja Obsługi Strona 105

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
Przeglądanie stron 104
Unit number setting switch of outdoor unit and confirming of setting.
4-digit number setting dialing switch and corresponding nixie tube confirming display are
equipped on the outdoor unit.
Setting mode as follows:
Before electrifying, manually set the outdoor unit number according the following table. After
electrifying, the nixie tube displays letter P”.
After the setting contents are locked, the nixie tube will steadily display the outdoor unit
number. (lock setting shall be done after finishing setting of the indoor and outdoor unit
number).
0 0 0 1
After installation or after adding new indoor units, when electrifying for the first time, it is
necessary to set unit number to the indoor units (note: the cabinet type indoor unit has been set
to be No. 3 unit, it is unnecessary to reset unit number to it. At the same time, it is forbidden
to set other units as No. 3 unit). Before electrifying, the lock button of the dialing switch shall
be at locked state. After electrifying:
l When indoor unit number is not set, the power light, operation light and timer light will
flash together waiting for receiving unit number.
l When indoor unit switches from one system to another system, because of the conflict
between the existed control address and the address auto set by outdoor unit to indoor
unit, the phenomenon of power light, operation light and timer light flashing together will
Digit 1 Digit 2 Digit 3 Unit number stood for
a. Unit number setting of outdoor unit (now it is unuseful)
b. Table of relation between dialing switch and outdoor unit number
c. Setting of indoor unit number
: 0
: 1
Bit 123
000
001
010
011
100
101
110
111
Preelected number
1
2
3
4
5
6
7
8
Confirmed number after electrified
1
2
3
4
5
6
7
8
Przeglądanie stron 104
1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 173 174

Komentarze do niniejszej Instrukcji

Brak uwag